EggRider C1 color display for eBikes offers real-time ride data, customizable settings, and Bluetooth app control in a compact, easy-to-read screen.

Compatible with Bafang BBS02/BBSHD UART Mid drive kits

Introducing our NEW colour eBike display EggRider C1

It is brighter and larger giving you an optimum readability.

Features:

Incorporated with our new colorful and animated dashboard, providing you all you need with a vibrant and premium feel.

Includes a remote, essential for navigating information/settings on the larger display.

Easy to read your statistics without the need for your phone.

Voltage readings range from 20V up to 60V.

With just a simple click, switch between different information displayed on the screen.

Get essential and accurate data including battery percentage, speed, power, and distance.

Access advanced statistics such as energy efficiency, range estimation, voltage, and battery cycles.

Detects real battery capacity and tracking stats of up to 3 battery profiles.

EggRider mobile app is available for Android and iOS, allowing easy configuration from the app.

In-depth charts capability for your rides.

Customisable settings:

Throttle yes/no switching

Pedal assist yes/no

Power levels

Specifications:

Display:

User Manual)

Size: 47.4mm x 64.2mm x 29.2mm

Weight: 100g (including 2 mounts)

Cable length: 30cm

Handlebar mounting bracket: 31.8mm diameter, provided with a rubber spacer that adapts to 22.2mm diameter

Physical buttons: Power On/Off

Connector: Higo/Julet waterproof 5 pin male/female

Bluetooth low energy (BLE)

Screw Hex bolt: M3x10mm

Mounting clamp pin: 2.0mm diameter and around 15mm length

Protection: Dust and water-resistant - IP65 protection

Remote:

Size: 17mm x 43.7mm x 44.2mm

Weight: 20g

Cable length: 24cm

Handlebar mounting bracket: 22.2mm diameter

Physical buttons: Level Up/Down, Walk-Assist and popular Road/OffRoad mode switch

Screw Hex bolt: M3x10mm

Mounting clamp pin: 2.0mm diameter and 15mm length

Protection: Dust and water-resistant - IP65 protection

Egg Rider is an advanced Bluetooth e-bike display with a mobile app, allowing you to enhance the performance of your e-bike ride.

You can get your riding statistics and customize your riding profile.

Egg Rider display compatibility

There are two main things to consider for compatibility:

Hardware - voltage, connector and pinout compatibility
Software - communication protocol compatibility

Warning

Having the same connector/pinout or bike model doesn't guarantee a compatibility.

Attention

EggRider is not compatible with CAN bus systems.

Do not make a connection if connectors are not the same type. Do not use unauthorized adapters such as female to female and male to male adapters because most likely they will burn the display and controller.

Wrong adapters

Features:

Lightweight and compact design keeping your handlebar clean
Small enough to avoid unwanted attention
Dust and water-resistant - IP65 protection
Voltage reading between 20V up to 60V
First to detect real battery capacity and tracking stats of up to 3 batteries
Android and iOS mobile apps for more statistics and configurations
Providing flexibility to comply with road e-bike laws worldwide
Ability to use the Egg Rider app as a larger display
In-depth charts capability for your rides
One button switch between two profiles
- Throttle yes/no
- Pedal-assist yes/no
- Power level

Egg rider Complete Video Guide

Specifications:

Size: 75mm x 47mm x 35mm
Weight: 31g
Cable length: 30cm
Handlebar mounting bracket: standard 22.2mm diameter
Physical buttons: Power On/Off, Level Up/Down, and popular Road/OffRoad mode switch
Connector: Higo/Julet waterproof 5 pin male/female (see image)
Bluetooth low energy (BLE)
Screw Hex bolt: M3x10mm
Mounting clamp pin: 2.0mm diameter and around 15mm length

EGGRIDER ANDROID APP: ANDROID APP

EGGRIDER APPLE APP: APPLE APP

USER MANUAL

PROGRAMMING VIDEO: PART

How to find out controller brand?

Attention

It is important to identify your controller brand, do not confuse this with the motor brand.

You can find the controller by following the display cable.

If you have a hub wheel motor, most probably your controller is Kunteng or Lishui.

The hub motor ebikes mostly have the controller in an aluminum box attached to the frame or integrated in the battery mount or the bike frame.

If you identified your controller as Kunteng(KT) or Lishui(LSW), keep in mind that there are more types of connectors, not only julet/higo 5 pin waterproof.

Compatibility list

Bafang hub motors

Bafang hub motors are not necessarily compatible. It is important to understand what controller brand you have. Please read all this page carefully.

Bafang mid-drive motors

Bafang mid-drive motors have 2 types of controllers based on the communication protocol

UART communication - Compatible ✅
CAN bus communication - Not Compatible ❌

UART display connector	CAN bus display connector

Bafang mid-drive ebikes have the controller integrated into the motor and the type is written on the case.
Egg Rider is compatible with Bafang mid-drive systems:

Bafang BBS01 250W 350W 500W 750W
Bafang BBS02 250W 350W 500W 750W
Bafang BBS03 BBSHD LUNA 750W 1000W 1500W 2500W Ludacris
Bafang Ultra M620
Bafang Ultra 1000W
Bafang MM G510 1000
Bafang M600
Bafang Max
Bafang MM G320
Bafang MM G330 250
Bafang MM G340
Bafang M300
Bafang M400

Mate bikes

Compatible with all Mate X versions. Please select Mate X EggRider version.

Attention

Mate classic bikes are not compatible with EggRider display.

Bike compatibility list:

MATE X 250
MATE X 250+
MATE X 750S
MATE City 250

Controllers supported:

Lishui LSW1545-5-2M
Lishui LSW856-66M
Lishui LSW856-66-1M

Attention

EggRider is not compatible with the following Mate X Controllers:

YCSH-C

Motors supported:

Bafang RM G060.750.DC 48V 750W SWX02
Shengyi DGW25 SY25N4820TA 48V 250W
Shengyi DGW25 SY254820SJ 48V 500W
JiaBo CZJB JB-104C2 24V-60V 750W

Replaces the following displays:

Key-Disp KD51C-D
Bafang DPC-14 / 850C 3.2-inch MATE-customized TFT LCD color display
Ukriver UKC1 / UK-CT-18 / UKCT-18 3.5-inch MATE-customized TFT LCD color display

RadPower bikes

Attention

EggRider is not compatible with RadPower bikes with upgraded Kunteng (KT) controllers.

EggRider offers 2 different versions for RadPower bikes.

Rad

Compatible RadPower bikes feature a 5-pin screw connector for the display as shown below and use a Lishui controller;

EggRider Rad compatible with the following models:

RadExpand 5
RadCity 1/2/3/4
RadMini 1/2/3/4
RadMission 1
RadRhino 1/5
RadRover 1/2/3/4/5
RadRunner 1/1 Plus/2
RadWagon 1/2/3/4

Radv2

Compatible RadPower bikes feature 5-pin julet connector for display as shown below and use ASI controller:

Radv2 RadPower display connector

EggRider Radv2 is compatible with the following models:

RadCity 5 Plus
RadRhino 6 Plus
RadRover 6 Plus
RadRunner 3 Plus
RadTrike 1

Bafang Displays